TL;DR
Pick level ground, clear it of debris, lay a ground sheet, inflate the walls to rated pressure, and fill. Total setup time is 15–30 minutes plus filling time.
The Problem
Rushed setup on poor ground causes sagging walls, uneven water line, leaks from sharp objects, and a pool that never sits right.
The Solution
Follow the full checklist: level ground, debris-free surface, ground sheet, even inflation, and a water fill that stops at the recommended line.
Step by Step
- Choose a firm, level spot away from overhanging trees
- Remove all stones, sticks, and sharp objects from the area
- Lay the included or separate ground sheet
- Unroll the pool and position it — you cannot move it once filled
- Inflate the walls with the supplied pump to the rated PSI
- Check all valves are closed and secure
- Fill with water to the recommended fill line (usually 80–90%)
- Connect the filter pump if included and run it for an initial cycle
Frequently Asked Questions
Can I set up a pool on grass? ▼
Yes, level grass works well. Mow it short, remove clippings and debris, and use a ground sheet underneath to protect the pool base.
How full should I fill the pool? ▼
Fill to 80–90% of wall height. Overfilling stresses the walls; underfilling reduces stability and usable depth.